A donation, either small or big, is very much appreciated and will go towards the development of up to date and new Windows Templates.
Below are the download links including the commands to install Windows on your server.
If you have any questions, you can email me at joodle [at] joodle.nl
Steps to install these templates on your server.
- Step 1: Boot your server into rescue mode, make sure choose rescue64-pro, FreeBSD rescue system will not work
- Step 2: Disable monitoring and reboot your server and wait till OVH sends you an email with the rescue details
- Step 3: Use PuTTy (or some other SSH tool) to connect to your server using the username and password which you can find in the rescue email
- Step 4: Copy the command below and paste it in the terminal, get a coffee or something else, installation take some time depending on the speed of your server
- Step 5: Once done, enable boot from HDD again and reboot your server, wait till it pings and you can login using the username and password provided at the end of this post
Windows Server 2016 Standard Evaluation (180 Days):
wget -O- 'https://mirror.joodle.nl/WS2016Evaluation-Kimsufi.gz' | gunzip | dd of=/dev/sda
Windows Server 2012 R2:
wget -O- 'https://mirror.joodle.nl/WS2012R2-Joodle-Template.gz' | gunzip | dd of=/dev/sda
Windows Server 2008 R2 Webserver:
wget -O- 'https://mirror.joodle.nl/WS2008R2-Joodle-Template.gz' | gunzip | dd of=/dev/sda
Windows Server 2008 R2 Standard:
wget -O- 'https://mirror.joodle.nl/WS2008R2Standard-Joodle-Template.gz' | gunzip | dd of=/dev/sda
Windows Server 2008 R2 Enterprise:
wget -O- 'https://mirror.joodle.nl/WS2008R2Enterprise-Joodle-Template.gz' | gunzip | dd of=/dev/sda
Windows Server 2008 R2 Datacenter:
wget -O- 'https://mirror.joodle.nl/WS2008R2Datacenter-Joodle-Template.gz' | gunzip | dd of=/dev/sda
Windows 7 Ultimate Edition:
wget -O- 'https://mirror.joodle.nl/WS7-Joodle-Template.gz' | gunzip | dd of=/dev/sda
Windows 10 Pro:
wget -O- 'https://mirror.joodle.nl/WS10Pro-Joodle-Template.gz' | gunzip | dd of=/dev/sda
Windows 8.1:
wget -O- 'https://mirror.joodle.nl/WS8.1-Joodle-Template.gz' | gunzip | dd of=/dev/sda
Use the following credentials to login:
Windows Server Versions
Username: Administrator Password: Password147
Windows 7, Windows 8.1 & Windows 10
Username: Admin Password: Password147
We do not provide any cracked content, nor pirated content. We also do not provide any serial keys/codes and/or activated Windows templates.
Hello, have a question.
Ordered “SYS-IP-2” from SoYouStart, making an default install like on every server, after 10-15 minutes server is turning off (does not respond to ping, cant connect). All power settings are OK + When its not respond im on it doying something…
Where can be a fail? I tried to install Windows Server 2008 R2 (Standart, Enterprise) and Windows Server 2012.
Any ideas? ๐
You need to activate the windows – this is common issue if your windows is not activated with a proper key.
Hi
I also worry about the installation happening super well via the rescue but no response to the ping.
I have 3 sda via fdisk -1 sda1 / sda2 / sda3 to know that the 2TO are on sda2 I tried the one in the command but nothing to do on a KS-4C
You need to disable monitoring from the SYS portal for that server.
Working!! Nice!!!
Username + Password doesn’t work for Windows 8.1 ๐
Hi, once installed… how can I connect to windows screen?
Using Remote Desktop software on your Windows
what about dedicated servers in ovh with nvme
they have mda1 mda2 md3
should i change the dev/sda to dev/mda
No. That is software raid devices on linux.
I would like to know if we could make my windows updates after installation?
If you have a valid licence yes, of course.
Can you try this for OVH VPS’ preferable the SSD range ones?
I’m sure a lot of people would love to get their hands on a VPS running Windows for under ยฃ5 per month!
Thanks!
windows update still working?
my OVH rescue-pro only has 3GB of space so i cannot use sda. could i use sdb?
Thank you joodle for work.
Good luck
I have purchased server from soyoustart.com and kimsufi.com I was facing reboot issue from both servers, I have tried all above given OS images and every time server was rebooting after 1 hour, Now I am able to fix the issue via following tutorial so sharing it here
How to convert Windows Server 2012 R2 Standard Evaluation into Full version
1) Open CMD as Administrator (in my case I used Windows Power Shell)
2) Digit:
DISM /online /Get-TargetEditions
3) Press Enter
4) Digit:
DISM /online /Set-Edition:ServerStandard /ProductKey:DBGBW-NPF86-BJVTX-K3WKJ-MTB6V /AcceptEula
5) Press Enter and wait
6) Reboot the system
Now you have converted the evaluation version into full ones.
โโโโโโโโโโโโโโ
How to convert Windows Server 2012 R2 Datacenter Evaluation into Full version
1) Open CMD as Administrator (in my case I have opened Windows Power Shell)
2) Digit:
DISM /online /Get-TargetEditions
3) Press Enter
4) Digit:
DISM /online /Set-Edition:ServerStandard /ProductKey:Y4TGP-NPTV9-HTC2H-7MGQ3-DV4TW /AcceptEula
5) Press Enter and wait
6) Reboot the system
Now you have converted the evaluation version into full ones.
Source: https://www.youtube.com/watch?v=QenswufMqnY
I can confirm this is working perfectly.
You only need to activate it quickly because the shutdown (license is expired).
Thank you.
Windows 8.1 password and username doesn’t work
I installed windows but my server keeps going offline i have no idea why any help?
nothing happens after it finishes… restart it from hdd no response. and it does not even format hdd at all, i can see it still has my old data by the used space
is there any visual feedback when the installation is done?
Hello i want ask how change system partition ? i have only2.65GB free of 39.8
Thank you! I understand wanting to keep the C: drive as small as possible but Windows 10 really can’t handle only having 14.5GB on the C drive. Trying to install any updates eats up all of the drive and then the updates fail. I symlinked the Windows update folder to a second drive and even then Windows starts doing who knows what and eats up 1.5GB of the 3GB left on the C drive. The updates haven’t even installed yet.
Who the hell doesn’t even expand the partition anyway?
If you can not download the File just use “wget -4” cause IPv6 does for some reason not work.
I do not know why maybe misconfiguration.
Works perfectly, thanks so much man !
Are these files in english only or multilanguage ?
If in english, is it possible to find the equivalent in french here or everywhere else ?
Hello.
Can you update templates? Trial period already expired at this OS.
Hey,
anyone ever got the CredSSP error?
https://i.gyazo.com/90a8df4baf67cbbb92f3a268c2e3ee59.png
yes i also have this error
The win2008r2 standard have wannacry malware
I have this problem !!! Dont use it
Not working on a OVH 24T storage server.I think maybe the dd-pack does not include the drivers for the sas hard drive .nothing happen after success downloading and the hard boot with changed boot mode.
Doesn’t work :/
CredSSP error.
Installation done, activatd Windows correctly… but why I can only use 40 GB of hard disk out of 2 TB? What should I do to use it?
Hola a mi me sucede igual solo me aparece 20 Gb y mi server es de 2x2TB como solucionastes ?
Hello there, nice tutorial, have you ever test this method with a Contabo VPS ?
Ran into a problem using KS-12 Server – Intel W3520 – 32GB (BHS/Canada)
Remote Desktop Connection The Function requested is not supported
Solution:
Solution 2: Using Group Policy
Go to Run โ> gpedit.msc to open Group Policy Editor.
Go to the following policy path:
Computer Configuration -> Administrative Templates -> System -> Credentials Delegation
From the right-hand pane, open Encryption Oracle Remediation.
Select Enabled and set the protection level to Vulnerable.
Go to the command prompt on your machine and run the following command:
gpupdate /force
This will apply the group policy immediately and you will be able to use Remote Desktop without restarting the computer.
https://www.itechtics.com/solved-authentication-error-function-requested-is-not-supported/
I’m currently encountering the same problem, and it still isn’t working. Did you find any solution?
Windows Server 2008 R2 not working on OVH VPS SSD1. You get bootloop with bluescreen.
Trying others now.
Username + Password doesnโt work for Windows10 . pls help ๐
Please note this does work on Hetzner – i use it myself. Also note that there is cheaper servers there at great specs for same price ๐ just server bidding is your friend ๐
Hello,
I like your shares.
But, how do you make these “build”?
If I want to creat my-self builds for exemple, how can I do?
(just a link about the process for exemple)
I have a ks7 of Kimsufi, and want install my win10pro or datacenter (I have keys).
I found a key in my office of standard version 2016, but your buils not want it…
Thank in adavnce!
P.S. I’m not linux friendly at this moment, so if you try to explain me in linux language… I loose you :s
Hello, I have tested your version of windows server 2008 r2 and my server Intel Corporation DH61AG does not work
can it be for the network drivers? thank you
Hey mate,
just wanted to say thank you for your great work. Keep on. Works like a charm!
best regards
work on digitalocean ?
I cannot get this work, after process is done, when I boot i get the message “rEFInd – Chain or hard drive failed. Next”
I’m also getting this on some servers like OVH 30TB server. Did you find a solutions?
The username and password for Windows 10 Pro does not work. Please update with the correct credentials.
It dont work on any WSI (Wholesaleinternet) Server, have anybody a idea why not?
Used the same steps on OVH VPS 2018 SSD 3 but I see an error from failed to boot
Me funciono pero en disco C solo tengo 20 gb Y mi server es de 2x2TB como puedo solucionarlo ?
I type the command in putty and I get this message. Can not write to ‘-‘ (Broken pipe).
Thanks, win2012r2 run fine on sys and ks, do you plan to prepare the image for win server 2019? Tnx
The windows 7 have a backdoor.. “”u.exe”” in the system32 folder…
Good to know. I just had my Windows 7 install deemed hacked after 4 Antihack notices. They force you to reinstall to use the hardware again so be warned to all.
Same with Windows Server 2008 R2. Malware Antimaleware by malwarebytes should help you.
Its just a downloader – i had to fix it myself ๐
Before this week i didn’t have a problem so something happened to either the server or the image i don’t know its one or the other.
Hey, add 2019 please
Hello. Can you help me with installation Windows hyper-v server 2016 on OVH?
Why this message appears ?
Cannot write to โ-โ (Success).
my download wad 12 mb/s but at the end all the time it drops to 150 kb/s why that happends?
Hey, add 2019 please
I type the command in putty and I get this message. Can not write to โ-โ (Broken pipe).
i get windows is disbled please contact system admin how do i get around this please
Hey guys,
I was able to install it , activate the product to avoid loosing contact with the machine , however my graphic card is a Microsoft basic driver , any idea how to install the correct driver ?
Thank you in advance
hello guys,
the only change I made to install Windows 10 Pro was to give this command:
wget -O- ‘https://mirror.joodle.nl/WS10Pro-Joodle-Template.gz’ | gunzip | dd of=/dev/sda
I installed Windows 10 (thank you for the image). I can ping my server, but I can’t establish Remote Desktop connection (it says connection refused), any clue?
credssp error.
how can i fix it ?
than ks
How to fix this?
cannot write to โ-โ (broken pipe).
I just have 20 GB on C, but my dedicated has 2x 512GB. How can I use the rest?
Druz’ya privet. Ustanovil windows s. 2016. Skazhite mne pozhaluysta, kak uvelichit’ mesto na diski c:/
ะะฐััะธัััั ะฟัะพะธะทะฝะพัะธัั
Hi friends. Installed windows s. 2016. Please tell me how to increase the disk space c: /
Hello friend. Your blog helped me. Thank you for that. If you have time, please do the instructions for installing windows server 2019 on kimsufi. I would be very grateful. Sorry for my English, I’m from Russia )))
Hello
I tried to install Win2012 server on KS-3 Server – Atom N2800 – 4GB DDR3 1066 MHz – 2To SATA
After first install and 2 or 3 restarts all worked fine, I also added my own key.
Then after a reboot, I could no more connect to windows server over RDP, on Kimsufi dashboard all looked ok, no ping anymore … Is such thing happens how can we connect to the server and try to solve a reboot problem if RDP don’t show anything ? I reinstalled the server but i can not do this in future as I want to store data on it.
I had that problem, turns out I enabled the public firewall without enabling the RDP rules first.
I install win10 but everyday server go offline?Any help?
Thanks for keeping this project live
On windows 10, sleep after 30 min was on, it cause my server to be offline and unreachable. Turn this off, if you install windows 10. Cheers!
Hello,
I created successful a Win2019.(Installed on KS11) I will create a Template with the 180 Days Evalution. If some is interested can write me for the Template.
you pc run into a problem a problem and neet to Restart after restarting its showing me Windows Failed to Start. A recent hardware or Software might be the cause. What i Should do now ?
this worked fine with 2016 had to google how to get around the CredSSP issue as the image doesnt have recent updates
recommmended thanks again
After you install any of this windows templates please run any anti malware software. I used superantispyware and it blocked 3 malicious files.
Hello, I tried to install windows server 2016 several times, it downloaded nicely, after that, booting and restarting. After the reboot, I waited a few hours, unfortunately the server is offline all the time, it does not ping, subsequent restarts and waiting does not help. I will add that I used to install the system from this manual many times and there were no problems. Thank you very much in advance for your help and best regards.